Clark Hall

Classroom Technology in Clark Hall


Clark 155

Clark 155

TV: Vizio 65″ “Zoom Cart” (with Logitech Webcam and Speakerphone)

Screen: front of room

Projector: Epson Powerlite 965H

Controller: Epson projector remote

Sound: volume control from Epson remote, wall mounted speakers

Connections: VGA, HDMI, iProjection*

Installed media players: none

Bresee 209 Cables & Remote

  • Turn projector on by pressing the power button on the remote once (blue button, top left of remote).
  • There is a VGA + Audio and an HDMI cable on wall by the screen. Plug either one into your laptop.
  • Press SOURCE SEARCH on the remote to display the source that is connected. If your laptop doesn’t show up on the screen, you may need to change your laptop’s display settings.

  • The Epson projector remote controls the volume.

  • Turn off the projector by pressing the power button on the remote twice.

For assistance using the “Zoom Cart” for videoconferencing, please contact media@hartwick.edu

– top of page –


Clark 244

Clark 244

Screen: front of classroom

Projector: Epson Powerlite 107

Controller: Epson projector remote

Sound: control volume with Epson remote, wall mounted speakers

Connections: VGA, HDMI, iProjection*

Installed media players: Document camera

Clark 244

 

  • Connect either the HDMI or VGA + headphones jack to your laptop. Turn your laptop on.
  • Turn the projector on with the Epson remote. It should automatically start up in HDMI1 which is correct for either cable you use. If it says “No Signal”, press HDMI/Video on the Epson remote.
  • Epson iProjection is enabled on this projector. Contact Media Services about wireless projection of slides or images – email media@hartwick.edu.
  • If you need to use the document camera, turn it on and press Computer on the Epson remote.
  • The Epson remote controls the audio volume.
  • Please be sure to turn the projector off when you leave. Press the blue Power button (top left corner) two times.

– top of page –


Clark 248

Clark 248

Screen: front of classroom

Projector: Epson Powerlite 107

Controller: Epson projector remote

Sound: control volume with Epson remote, wall mounted speakers

Connections: VGA, HDMI, iProjection*

Installed media players: none

Clark 248

  • Connect either the HDMI or VGA + headphones jack to your laptop. Turn your laptop on.
  • Turn the projector on with the Epson remote. Press SOURCE SEARCH to display the source that is connected.
  • Epson iProjection is enabled on this projector. Contact Media Services about wireless projection of slides or images – email media@hartwick.edu.
  • The Epson remote controls the volume.
  • Turn off the projector by pressing the blue power button (top left) on the remote twice.

– top of page –


Clark 251

Clark 251

Screen: front of classroom

Projector: Epson Powerlite 965H

Controller: Epson remote

Sound: Wall mounted speakers

Connections: VGA, HDMI, iProjection*

Installed media players: Document camera

Clark 251-Controller

  • Connect either the HDMI or VGA + headphones jack to your laptop. Turn your laptop on.
  • Turn the projector on with the Epson remote. Press SOURCE SEARCH to display the source that is connected.
  • The Document Camera in the podium is still functional. Press SOURCE SEARCH on the Epson Remote to switch to this display.
  • Epson iProjection is enabled on this projector. Contact Media Services about wireless projection of slides or images – email media@hartwick.edu.
  • The Epson remote controls the volume.
  • Turn off the projector by pressing the blue power button (top left) on the remote twice.

– top of page –


Clark 252

Clark 252

Screen: front of classroom

Projector: Epson Powerlite 107

Controller: Epson projector remote

Sound: control volume with Epson remote, wall mounted speakers

Connections: VGA, HDMI, iProjection*

Installed media players: none

  • Connect either the HDMI or VGA + headphones jack to your laptop. Turn your laptop on.
  • Turn the projector on with the Epson remote. Press SOURCE SEARCH to display the source that is connected.
  • Epson iProjection is enabled on this projector. Contact Media Services about wireless projection of slides or images – email media@hartwick.edu.
  • The Epson remote controls the volume.
  • Turn off the projector by pressing the blue power button (top left) on the remote twice.

– top of page –


Clark 329

Clark 329

Screen: front of classroom

Projector: Epson Powerlite 107

Controller: Epson wall mounted controller (ELPCB02)

Sound: wall mounted speakers

Connections: VGA, HDMI, iProjection*

Installed media players: DVD, document camera

Clark 329

  1. Turn the projector on by pressing the Projector button twice – projector will beep when it turns on (labelled 1).
  2. If you connect your laptop with the VGA cable, press VGA (labelled 2).
  3. To select the Document Camera, press DOC CAM (labelled 3).
  4. To use the DVD or VCR in the podium, press DVD/VCR (labelled 4). Use the LG remote to control the player and menus.
  5. If you connect your laptop with the HDMI cable, press HDMI (labelled 5).
  6. Wireless projection from laptops, phones and tablets is now possible (labelled 6). Epson iProjection is enabled on this projector. Contact Media Services about wireless projection of slides or images – email media@hartwick.edu.
  7. To control the volume from any of the sources, use the volume knob (labelled 7). If you do not have adequate volume, you may have to adjust settings on your laptop.
  8. Turn the projector off by pressing the Projector button once (labelled 1).

– top of page –


Clark 342

Clark 342

Screen: front of classroom

Projector: Epson Powerlite 107

Controller: Epson projector remote

Sound: volume control with Epson remote / wall mounted speakers

Connections: VGA, HDMI, iProjection*

Smartboard: installed but not tested

Installed media players: none

Bresee 209 Cables & Remote

  • Turn projector on by pressing the power button on the remote once (blue button, top left of remote).
  • Connect either the HDMI or VGA + headphones jack to your laptop. Turn your laptop on.
  • Press SOURCE SEARCH to display the source that is connected.
  • Epson iProjection is enabled on this projector. Contact Media Services about wireless projection of slides or images – email media@hartwick.edu.
  • The Epson remote controls the volume.
  • Turn off the projector by pressing the power button on the remote twice.

– top of page –


Clark 346

Clark 346

Screen: front of classroom

Projector: Epson Powerlite 107

Controller: Epson projector remote

Sound: Sherwood amp / wall mounted speakers

Connections: VGA, iProjection*

Installed media players: DVD/VCR

Bresee 209 Cables & Remote

  • Turn projector on by pressing the power button on the remote once (blue button, top left of remote).
  • Plug VGA cable into the laptop. If using audio, plug the audio jack into the headphone port on the laptop.
  • Epson iProjection is enabled on this projector. Contact Media Services about wireless projection of slides or images – email media@hartwick.edu.
  • The stereo amp under the podium controls the audio. Press the button under LT for laptop or DVD/VCR. Volume knob is on the right side.
  • Turn off the projector by pressing the power button on the remote twice.

– top of page –


Clark 349

Clark 349

Screen: front of classroom

Projector: Epson Powerlite 107

Controller: Epson projector remote

Sound: control volume with Epson remote, wall mounted speakers

Connections: VGA, HDMI,iProjection*

Smartboard: installed on wall but not connected to projector

Installed media players: none

Bresee 209 Cables & Remote

  • Connect either the HDMI or VGA + headphones jack to your laptop. Turn your laptop on.
  • Turn the projector on with the Epson remote. Press SOURCE SEARCH to display the source that is connected.
  • Epson iProjection is enabled on this projector. Contact Media Services about wireless projection of slides or images – email media@hartwick.edu.
  • The Epson remote controls the volume.
  • Turn off the projector by pressing the blue power button (top left) on the remote twice.

– top of page –


Clark 352

Clark 352

Screen: front of classroom

Projector: Epson VS355

Controller: Epson projector remote

Sound: Teac amp, wall mounted speakers

Connections: VGA (HDMI available on request)

Installed media players: DVD/VCR

Bresee 209 Cables & Remote

  • Turn projector on by pressing the power button on the remote once (blue button, top left of remote).
  • Plug VGA cable into the laptop. If using audio, plug the audio jack into the headphone port on the laptop.
  • The amp in the rack controls the audio.
  • Turn off the projector by pressing the power button on the remote twice.

– top of page –


Clark 356

Clark 356

Screen: wall in classroom

Projector: Epson Powerlite 83+

Controller: Epson projector remote / Extron Switcher

Sound: Sony amp, wall mounted speakers

Connections: VGA

Installed media players: DVD/VCR, document camera

– top of page –


Media Services provides consultation, design, installation and maintenance services for the College classrooms, meeting rooms, and other learning environments.

* Wireless projection from laptops, phones and tablets is now available in several rooms. There are some limitations, but it does offer additional options for classroom presentation. If you would like to test out the Epson iProjection app, please email spiwakc@hartwick.edu.

Details on these services are available by calling Media Services at 431-4176 or emailing spiwakc@hartwick.edu.


Classroom Technology Designs by Building

Back To Top